Studio 5000 Architect provides a design environment optimized for the management of reusable engineering content in multiple controller and HMI automation systems. With Studio 5000 Architect you can jump start your initial system creation for your control and visualization applications.
ORDERING INFORMATION
Studio 5000 Architect™ activates with Logix Designer Full, Standard, and Pro licenses
Studio 5000 Architect™ can also be purchased standalone
Studio 5000 Architect 2.0 is included in the Studio 5000 Logix Designer V30 media release

FactoryTalk® Gateway is the next generation, highest performing Classic OPC DA data server for the Logix5000 controller family. FactoryTalk® Gateway utilizes RSLinx® Enterprise and FactoryTalk® Live Data
to distribute and share control system data. This gives you the fastest data rates and capacity possible, while minimizing the impact on your automation networks and controllers. FactoryTalk® Gateway delivers a fully scalable solution from small applications running on a single PC and a single controller to large distributed and even redundant data server configurations communicating to higher volume of controllers. The FactoryTalk® Gateway is available with multiple tag quantities from 5 thousand, 32 thousand, 75 thousand and unlimited editions so that you can acquire just enough to meet your application’s needs.

RSLinx® Classic is the most widely-installed Communications software in automation today. All editions of RSLinx® Classic deliver the ability to browse your automation networks, configure and diagnose network devices. RSLinx® Classic Lite is included at no extra cost with most Rockwell Automation design software so that you can manage and maintain your control system. RSLinx® Classic “Single Node”, “OEM” and “Gateway” editions provide both DDE and Classic OPC DA data servers to permit 3rd party software to access information within your control devices. RSLinx Classic “Single Node” permits a 32bit application running on the same PC with RSLinx Classic to interface with a single controller. RSLinx® Classic “OEM” goes further by communicating with a moderate number of controllers. RSLinx® Classic “Gateway” expands this to support 64 bit applications that are running either on the same PC or a remote PC using Ethernet to pass information between the computers. The “Gateway” edition of RSLinx® Classic can also act as a centralized network connection point for multiple computers running RSLinx® Classic so that you can centralize the administration of your network configuration.

The RSLogix™ family of IEC-1131-compliant ladder logic programming packages helps you maximize performance, save project development time, and improve productivity. This family of products has been developed to operate on Microsoft Windows® operating systems. RSLogix 5 supports the Allen-Bradley PLC-5® family of programmable controllers.

The RSLogix 5 programming package is compatible with programs created with Rockwell Software DOS-based programming packages for the PLC-5 processors, making program maintenance across hardware platforms convenient and easy.

The RSLogix™ family of IEC-1131-compliant ladder logic programming packages helps you maximize performance, save project development time, and improve productivity. This family of products has been developed to operate on Microsoft Windows® operating systems. Supporting the Allen-Bradley SLC™ 500 and MicroLogix™ families of processors, RSLogix™ 500 was the first PLC® programming software to offer unbeatable productivity with an industry-leading user interface.

RSLogix 500 programming package is compatible with programs created with Rockwell Software DOS-based programming packages for the SLC 500 and MicroLogix families of processors, making program maintenance across hardware platforms convenient and easy.

Studio 5000 Logix Designer is the one application to configure, program and maintain the entire Allen-Bradley® Logix 5000 family of controller’s products and related devices. Its intuitive programming environment allows users to work collaboratively to design and maintain their systems.

FactoryTalk® AssetCentre provides you with a centralized tool for securing, managing, versioning, tracking and reporting automation related asset information across your entire facility. It can do this automatically, with limited additional management oversight or work from employees. FactoryTalk AssetCentre can impact uptime, productivity, quality, employee safety or regulatory compliance.

With FactoryTalk AssetCentre, you can:

Secure access to the system
Track detailed users’ actions
Automatically track firmware versions
Manage historical versioning of any electronic file
Provide automatic backup and compare operations on supported devices
Add backup and compare plug-ins for 3rd party vendor devices
Configure process instrumentation
Manage instrumentation calibration schedules and certificates

Studio 5000 virtual design increases design productivity, reduces risk, and decreases overall project costs. Studio 5000 Logix Emulate is at the core of Studio 5000 virtual design, which enables Machine Prototyping, Throughput Analysis, Virtual Commissioning and Operator Training Solutions (OTS). Logix Emulate provides the ability to validate, test and optimize application code independent of physical hardware. New interface capabilities provide connectivity to 3rd party simulation and Operator Training Systems allowing users to simulate their entire process and train teams in a safe, virtual environment.

Application Code Manager is a tool that enables more efficient project development with libraries of re-usable code. You can create modular objects with customizable configuration parameter using the re-usable content, allowing you to specify the pertinent information on how the object should be used in a project. Application Code Manager creates not only the coding for the modular object but also the associated visualization, historical and alarming elements.

Studio 5000 View Designer is the design environment for the PanelView 5000 family of operator terminals. The integration of the PanelView 5500 with Studio 5000 View Designer helps you bulid modern applications more easily and improve operator performance with an intuitive design environment.

With a common launcher for creating projects as Logix Designer, you can enter configuration information once and leverage it across the entire automation design system, providing new levels of integrated design, operations, and maintenance.

Studio 5000 Logix Designer is the one application to configure, program and maintain the entire Allen-Bradley® Logix 5000 family of controller’s products and related devices. Its intuitive programming environment allows users to work collaboratively to design and maintain their systems.

RSNetWorx™ products provide design and configuration management services for open standard networks from ODVA, including ControlNet, DeviceNet and EtherNet/IP. RSNetWorx allows you to achieve maximum productivity with your ControlNet and DeviceNet installations. You will be able to define and configure the devices on your network quickly through a simple software interface. This definition can take place offline using drag and drop operations or online by using RSLinx® to browse a ControlNet or DeviceNet network.